MQB Chassis | Intercooler

Only The Driven know that the cooler the air, the more power produced. Revo Intercoolers drastically improve your vehicles ability to cool air compressed by the turbo. Increased volume and surface area, bar and plate cores with end tanks specifically designed to promote even airflow all play a part in lowering temperatures; without negatively affecting pressure.

Prices shown are excluding local taxes where applicable

Revo Air Intercooler

MQB 1.8/2.0 TSI EA888 GEN 3 & EVO

The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow by decreasing turbulence and increasing airspeed into the bar and plate core. This enhances charge air cooling giving you access to more power throughout the rev range.

The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures by up to 36ºC vs. the MQB Golf R intercooler, allowing you to drive harder, for longer.

Key Features

  • Bar & Plate Core Design
  • Fully Cast End Tanks
  • OEM Fitment
  • Up to 51% Increased Core Volume
  • Over 36ºC Lower AIT

Increased Core Volume

The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Designed from the ground up, the Revo Intercooler has much larger core volume than the OEM part and offers perfect fitment, improving cooling by utilising the full volume of the stock location space as well as cold ambient air from the front of the vehicle.

Revo MQB Intercooler

End Tank Design

The stock end tanks are inefficiently designed and create turbulent air in corners. These sections create a natural flow distribution but slow charge air and increase pressure drop. The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core. Coupled with a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions from turbulent air pockets found in the OE intercooler. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.

Revo MQB Intercooler


Bar and Plate Core

Designed with a bar and plate core to maximise the efficiency of heat transfer, the pressure drop is also controlled as the air meets less resistance compared to that of a tube and fin alternative. The Revo Intercooler also features carefully specified fin geometry to maximise cooling properties while minimising flow restriction. The ambient core side utilises louvred fins to slow ambient airflow which improves heat transfer, while the charge core side features an offset internal fin design to balance surface area and air resistance to minimise pressure drop.

Revo MQB Intercooler


Silicone Hoses (Available as a separate item, or included in the full kit)

Stronger oil-resistant silicone hoses, the Revo Intercooler can be installed using the stock pipework or recommended Revo Intercooler pipework. The internal diameter of each silicone is precisely matched to the outer diameter of the ribbed inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components.

Revo MQB Intercooler


Brackets (Included with Intercooler)

To ensures precision fitment, Only Revo offers a CNC machined bracket system. Produced to a superior tolerance than that of a cast mounting system, this unique feature also ensures that the supporting brackets are strong and less prone to failure.

Revo MQB Intercooler


Intercooler Pipes (Available as a separate item, or included in the full kit)

Featuring larger internal diameters, fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively.

A multitude of design features and attention to detail that Only Revo offer means this is a product that not only looks great but more importantly performs. Reinforced, oil-resistant silicone hoses, lightweight mandrel-bent aluminium pipework and flush fit joints to eliminate turbulence, the Revo Intercooler Pipe upgrade is designed to fit either the stock or Revo Intercooler. More Information

Revo MQB Intercooler


Research and Development

All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout the rev range as highlighted during controlled Dyno testing.

The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OEM Intercooler with Revo Stage 2 software, a Revo air intake system and Milltek downpipe, the Revo Intercooler was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling.

Performance Data

Golf GTI with Revo Stage 2 Software, Golf R intercooler and Carbon Series Front Scoop

Showing the last of five consecutive dyno runs, the efficiency of the Revo Intercooler over the OEM Golf R intercooler is highlighted. With max gains of +10 HP & +20NM Torque, along with increased performance throughout the entire rev range, the stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout, losing just 2% peak power over the 5 runs compared to 5% on the stock cooler.

Revo MQB Intercooler

Inlet Temperature

This is a metric used to confirm that testing on the Revo MQB Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the inlet temperatures during testing were hotter on the Revo Intercooler, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency.

Revo MQB Intercooler

Outlet Temperature

This graph illustrates the increased cooling performance of the Revo intercooler vs OEM Golf R intercooler over all five runs. The Revo Intercooler keeps temperatures below 49ºC on the fifth run, lower than the stock on its first at 58ºC.

Revo MQB Intercooler




Vehicle Applications

Manufacturer Model Engine Engine Code Year Intercooler Intercooler Hoses Full Kit
Audi A3 (8V) 1.8 / 2.0 TSI   2012 - 2020 RT991M100400
Audi A3 (8Y) 2.0 TSI CZPB 2020 > RV591C100300  
Audi S3 (8V) 2.0 TSI CJXC 2012 - 2020 RT991M100400
Audi S3 (8Y) 2.0 TSI DSFA 2021 >  RV591C100300  
Audi Q3 (F3) 2.0 TSI / 45 TFSI CJXG 2019 > RV591C100300  
Audi TT / TTS 2.0 TSI DJHA 2015 > RT991M100400
Audi TT (FV) 2.0 TSI DNPA 2021 > RV591C100300  
Cupra Leon (KL) 2.0 TSI DNPA 2020 > RV591C100300  
Seat Leon (5F) 1.8 / 2.0 TSI   2013 - 2020 RT991M100400
Seat Formentor 2.0 TSI DNPA 2021 >  RV591C100300  
Skoda Octavia (5E) 1.8 / 2.0 TSI   2013 - 2020 RT991M100400
Skoda Octavia (NX) 2.0 TSI DNPA 2020 > RV591C100300  
VW Golf (MK7/AU) 1.8 / 2.0 TSI   2013 - 2020 RT991M100400
VW Golf GTI / R (MK7/AU) 2.0 TSI   2014 - 2020 RT991M100400
VW Golf GTI (MK8/CD) 2.0 TSI DNPA 2021 > RV591C100300  
VW Golf R (MK8/CD) 2.0 TSI DRNA 2021 > RV591C100300  
VW Passat (3G) 1.8 / 2.0 TSI   2015 > RT991M100400
VW Tiguan (AD/AX) 2.0 TSI   2016 > RT991M100400
VW Tiguan (AD/AX) 2.0 TSI DNPA 2021 > RV591C100300  
VW Touran (5T) 2.0 TSI   2016 > RT991M100400  


  1. Simple replacement of the OEM part
  2. Also available for the Golf Mk5/6 MLB Platform
  3. Will not fit on cars with O2 sensors without interference on the sensor. It is recommended to speak with your Revo dealer before if you are unsure.

Please contact your local Revo Authorised Dealer for additional information and availability.

© Revo

This product is suitable for the following vehicle makes and models

AUDI A3 (8V 2012 - 2019) more info
AUDI Q2 more info
AUDI Q3 more info
AUDI S3 more info
AUDI S3 Saloon more info
AUDI TT MK3 (FV/8S 2014 >) more info
AUDI TTS more info
SEAT Ateca (KH 2016 >) more info
SEAT Formentor (KM 2021 >) more info
SEAT Leon MK3 (5F 2012 - 2020) more info
SEAT Leon MK4 (KL 2020 >) more info
SKODA Kodiaq more info
SKODA Octavia MK3 (2013 - 2020) more info
SKODA Octavia MK4 (NN/NX 2020 >) more info
VOLKSWAGEN Arteon more info
VOLKSWAGEN Golf VII more info
VOLKSWAGEN Golf VIII more info
VOLKSWAGEN Passat (B8 2015 >) more info
VOLKSWAGEN T-Roc more info
VOLKSWAGEN Tiguan (AD/BW) 2017-2020 more info