Software
2.9 TFSI
The new B9 RS models are powered by a 2.9 TFSI V6 twin-turbo engine producing 450PS and 600Nm of torque, which gives the same power as the previous model (B8) while making more torque, all from a smaller displacement engine. This later iteration of the RS classic utilises the 8-speed 'Tiptronic' AL552 automatic transmission.
Get far more than a peak power figure
Revo offers some of the most substantial performance increases on the market, however, only the driven know that peak figures form part of a much bigger picture and are never the sole focus during Revo’s development process; it’s all about the drive. Only Revo offers a perfect balance of performance, economy, and engine longevity.
Revo performance ECU Software gives you much more than just an increase in power and torque. A large part of development is based on driving scenarios and feedback; our calibration doesn’t just offer great dyno curves and peak power/torque figures but an exhilarating driving experience. Expect smooth and refined response at low RPM & partial throttle, with huge gains at wide-open throttle and throughout the whole rev range.
Software Features
SERIAL PORT SWITCH (SPS)
Switchable software for Stock and 3 performance modes.1
COLD START PROTECTION
RPM is limited until safe oil temperature is reached.
TEMPERATURE PROTECTION
Enhanced engine cooling and oil temperature management.
SPEED LIMIT
The top speed limit for this vehicle has been removed.
GLOBAL DEVELOPMENT PROGRAM
Only Revo operates a Global Development Programme through their network of over 400 Revo Authorised Dealers worldwide. Access to vehicles on this scale enables the calibration team to fine-tune products before release, testing products in a wide range of climates and conditions including altitude, fuel quality, humidity. This also allows Revo to test how Revo products perform in different driving scenarios and formed a vital part in the development of Performance ECU Software.
Developed on the racetrack, ready for the road.
The Revo tuning philosophy ensures that impressive performance benefits are balanced with useable, reliable power delivery that enhances the way you can drive your vehicle. Development on the road and racetrack as well as testing in controlled dyno conditions gives you a clearer picture of the performance you can expect from Revo ECU Software. Testing in this way plays an important role in ensuring the highest quality products and delivering the driving experience expected.
Only Revo performance ECU Software maintains and enhances factory safety levels along with additional driving features. With the SPS Software Switch, you can even switch between three pre-set fuel quality modes depending on the fuel you use.
Power Graphs
Graphs calculated from a DynaPack Hub dyno under controlled conditions.
PERFORMANCE DATA
Peak gains are calculated by the difference in peak values (headline figures) of the stock run vs Revo tuned run. Maximum gains are calculated at a single point of the RPM range where the maximum improvements in performance can be seen. This metric gives a better understanding of the performance gains throughout the entire rev range, rather than solely focusing on the peak numbers.
Power Gains
- Peak Gain: 62PS
- Max Gain: 82PS @ 4900RPM
Torque Gains
- Peak Gain: 116Nm
- Max Gain: 130Nm @ 4100RPM
ADDITIONAL FEATURES
COLD START PROTECTION
For engine oil to work effectively and lubricate your engine it needs time to warm up. When you first start your car, the cold oil is at a higher viscosity and flows more slowly, limiting the protection it can give to engine components. As the engine temperature increases, so does the oil temperature. This thins the oil, enabling it to run more freely and better lubricate the moving parts of your engine. Cold Start Protection helps protect engine components by limiting RPM until the oil temperature reaches this optimum operating level.
TEMPERATURE PROTECTION
Revo Temperature Protection is an additional safety feature that reduces overall load and RPM as the oil temperature passes a set limit. Exhaust gas temperatures (EGT) are also monitored, adapting the operating conditions (Air Fuel Ratio) to ensure they stay within safe parameters. If EGT's reach a set upper limit, then power is automatically reduced until the engine returns to a safe operating temperature. Additional changes to the calibration, including the after-run pump, are made to greater help control temperatures.
SWITCHABLE SOFTWARE1
Using an SPS switch you can take advantage of the switch-ability of Revo software. The Patented OBD2 interface is the ultimate compliment to Revo performance software, giving you the ability to switch between stock mode and 3 fuel quality modes via the vehicle OBD port.
- SPS Position 1 - Stock Mode
- SPS Position 2 - 95ron fuel
- SPS Position 3 - 97ron fuel
- SPS Position 4 - 98/99ron fuel
Simply select a program, plug in, wait a few seconds, remove the SPS device and start the car. It's simple and there's no fixed switch to install in the vehicle.
Additional Software Features
This software packs a host of additional software features to enhance your vehicle performance and driving experience:
- Stop/start button default mode reversed
- Faster Pedal Response
- Rescaled driver information gauges for accurate reporting
- Sport / Dynamic mode adjusted for optimal response / sound
- Exhaust flap adjusted to be open more often Dynamic mode
The Revo Difference
OBD Port Install
Revo Software can be installed quickly and safely via the OBD Port without the ECU.
Money Back Guarantee
We know you will love how Revo Software transforms your car. If you do not, we'll give you your money back.
Fuel Economy
Dependent on your driving style, this software will deliver like normal fuel economy in 'normal' driving conditions.Notes:
- Additional SPS Software Switch purchase required.
- All Revo Software availability is ECU ID Dependant.
Please contact your local Revo Authorised Dealer for additional information and availability.
© Revo
Revo ECU Software is only available from one of over 400 Authorised Dealers worldwide. You can find your closest dealer by clicking here.
Please note that although we always aim to release ECU Software that covers as many ECU variants as possible, from time to time Revo Software may not be available for your specific vehicle. Your Revo Authorised Dealer can submit a code request direct to Revo HQ if this is the case, however this does not guarantee a file will be made available.
Software available for your AUDI, RS4, 2.9 TFSI (DECA) (450ps)
Our qualified dealer network is spread far and wide, use the form to locate your closest revo dealer