ONLY THE DRIVEN
You will find the 2.0T EA888 Gen3b CZPC engine nested in vehicles within the Volkswagen Audi Group. Including Audi A1 and Polo GTI (AW Mk6)
The 2.0T 200PS CZPC Gen3b has seen some substantial changes from the previous Gen3 variant to keep in line with the latest emissions laws and attain significant gains for fuel-efficiency. Along with the physical changes to the engine, these are controlled by a Bosch MG1 ECU.
THE PERFECT BALANCE OF PERFORMANCE AND DRIVEABILITY
Revo offers some of the most substantial performance increases on the market, however, only the driven know that peak figures form part of a much bigger picture and are never the sole focus during Revo’s development process; it’s all about the drive. Only Revo offers a perfect balance of performance, economy and engine longevity.
Revo performance ECU Software gives you much more than just an increase in power and torque. A large part of development is based on driving scenarios and feedback; our calibration doesn’t just offer great dyno curves and peak power/torque figures but an exhilarating driving experience. Expect smooth and refined response at low RPM & partial throttle, with huge gains at wide-open throttle and throughout the whole rev range.
Software Features
SERIAL PORT SWITCH (SPS)
Switchable software for Antitheft and 3 performance modes1
TEMPERATURE PROTECTION
Enhanced protection based on Air and Coolant temperatures.
SPEED LIMIT UNLOCK
The top speed limit for this vehicle has been removed.
GLOBAL DEVELOPMENT PROGRAMME
Only Revo operates a Global Development Programme through its network of over 400 Revo Authorised Dealers worldwide. Access to vehicles on this scale enables the calibration team to fine-tune products before release, testing products in a wide range of climates and conditions including altitude, fuel quality, humidity. This also allows Revo to test how Revo products perform in different driving scenarios and formed a vital part in the development of Performance ECU Software.
Get far more than a peak power figure
The Revo tuning philosophy ensures that impressive performance benefits are balanced with useable, reliable power delivery that enhances the way you can drive your vehicle. Development on the road and racetrack as well as testing in controlled dyno conditions gives you a clearer picture of the performance you can expect from Revo ECU Software. Testing plays an important role in ensuring the highest quality products and delivering the expected driving experience.
Only Revo performance ECU Software maintains and enhances factory safety levels along with additional driving features. With the SPS Software Switch, you can even switch between three pre-set fuel quality modes depending on the fuel you use.
Power Graphs
ADDITIONAL FEATURES
COLD START PROTECTION
The ECU and Revo software will be constantly monitoring the coolant temperature. On startup, this will reduce boost/torque whilst the engine and coolant warm up but will also limit torque if the coolant passes the set upper limit. This added protection ensures we offer the perfect balance of performance, driveability, and longevity within our software.
TEMPERATURE PROTECTION
Revo Temperature Protection is an additional safety feature that reduces overall load as the air temperature passes a set limit. Exhaust gas temperatures (EGT) are also monitored, adapting the operating conditions (Air Fuel Ratio) to ensure they stay within safe parameters. If EGT's reach a set upper limit, then power is automatically reduced until the engine returns to a safe operating temperature.
GAUGE RECONFIGURATION
The Boost gauge has been reconfigured to display a true representation of the increased performance.
SWITCHABLE SOFTWARE1
Using an SPS switch you can take advantage of the switch-ability of Revo software. The Patented OBD2 interface is the ultimate compliment to Revo performance software, giving you the ability to switch between 3 fuel quality modes and an Anti-Theft mode via the vehicle OBD port.
- SPS Position 1 – Anti Theft Mode
- SPS Position 2 – 95ron Performance Mode
- SPS Position 3 – 97ron Performance Mode
- SPS Position 4 – 99ron Performance Mode
Simply select a program, plug in, wait a few seconds, remove the SPS device and start the car. It's simple and there's no fixed switch to install in the vehicle.
Find out more about the Revo SPS.
The Revo Difference
OBD Port Install
Revo Software can be installed quickly and safely via the OBD port without the need to open the ECU.
Money-Back Guarantee
We know you'll love how Revo Software transforms your car. If you don't, we'll give you your money back.
Fuel Economy
Depending on your driving style, this software will deliver like for like fuel economy in 'normal' driving conditions.
Notes:
- Additional SPS Software Switch purchase required.
- All Revo Software availability is ECU ID Dependant.
- Software features may vary depending on ECU ID.
Please contact your local Revo Authorised Dealer for additional information and availability.
© Revo
Revo ECU Software is only available from one of over 400 Authorised Dealers worldwide. You can find your closest dealer by clicking here.
Please note that although we always aim to release ECU Software that covers as many ECU variants as possible, from time to time Revo Software may not be available for your specific vehicle. Your Revo Authorised Dealer can submit a code request direct to Revo HQ if this is the case, however this does not guarantee a file will be made available.
Software available for your VOLKSWAGEN, Polo GTi / WRC, 2.0 TSI (CZPC) (200ps)
Our qualified dealer network is spread far and wide, use the form to locate your closest revo dealer